Flsun Sr Bed Size

Flsun Sr Bed Size. I also did an abs print just to test how fast i could push the flsun sr. 1x bed plate sized fridge magnet, sticky on one side usually included with the plate # installation.

Hier Huf 167 353 00

There are things i can not explain. He prints wonderfully dimensionally stable outside dimensions. Even though the model completed successfully, there are two small delaminations on the external walls of the model which are caused by printing abs without a completely enclosed machine.

The black cat model from eastman was printed at ~80mm/s with no enclosure.

1x bed plate sized fridge magnet, sticky on one side usually included with the plate # installation. Attach the giant fridge magnet (sticky side to the … 100 ℃ print bed material: ≤ 100 ℃ recommended slicer. A bore in the z direction will be 9.5mm while it will be 10mm.

I also did an abs print just to test how fast i could push the flsun sr... A bore in the z direction will be 9.5mm while it will be 10mm. There are things i can not explain. Clean the glass of any grease & debris; 1x bed plate sized fridge magnet, sticky on one side usually included with the plate # installation. The super racer from flsun is a very inexpensive delta 3d printer that meets the needs of a large number of target groups and makes ideas come true in no time. 265 mm / 10.4 inch in size; I also did an abs print just to test how fast i could push the flsun sr... 100 ℃ print bed material: